Michael Healy® Doorbells Ringers

Replacing an exsisting doorbell is easy. First turn off power to the doorbell and remove it to expose two thin wires. No need to worry the power coming into these are very low voltage. Screw backing plate to doorjamb with the wires coming through the large button hole of the plate. Attach one wire to each terminal on the button and push button into the backing plate. Attach the doorbell ringer to the backing plate using the supplied hardware and return power to the doorbell. Ding-Dung your done!!!

Hospitality Pineapple Polished & Highlighted Brass MHR01 3.75"H x 1.75"W	Hospitality Pineapple Oiled Bronze MHR59 3.75"H x 1.75"W	Brushed Nickel Silver & Polished Brass MHR60 3.75"H x 1.75"W
Fleur De Lys Polished Brass MHR43 2.75 "H x 2.5"W	Fleur De Lys Oiled Bronze MHR52 2.75 "H x 2.5"W	Fleur De Lys Polished Chrome MHR44 2.75 "H x 2.5"W
Smiling Sunface Polished & Highlighted Brass MHR24 3.25 "H x 3.25"W	Smiling Sunface Oiled Bronze MHR63 3.25 "H x 3.25"W	Smiling Sunface Brushed Nickel Silver MHR64 3.25 "H x 3.25"W

Michael Healy Knockes 1 2 3 4 5 6 7 8 9 10
Micheal Healy Doorbells (1) 2 3 4 Back